MUGEN MTX4 SET-UP FOR MENDIP TRACK
courtesy of Kev Kennedy
Front suspension |
|
Rear suspension |
|
Track width |
200m |
Track width |
200mm |
Ride height |
5.5mm |
Ride height |
6 mm |
Camber angle |
2.5 degrees left, 2.00 degrees right |
Camber angle |
4.5 degrees left, 4.0 degrees right |
Upper arm spacer |
1.00mm at front |
|
|
Toe angle |
1.5 degrees |
Toe angle |
- 3 degrees |
Rebound stop |
-1.00mm |
Rebound stop |
Plus 1mm |
Bump stop |
None |
Bump stop |
None |
Upper arm position |
1.00mm |
Lower arm position |
Standard as per kit |
Anti-roll bar |
Standard bar set at 45 degrees |
Anti-roll bar |
Standard bar set at longest length |
|
|
|
|
Front shocks |
|
Rear shocks |
|
Piston |
Standard as per kit |
Piston |
Standard as per kit |
Oil |
Mugen 600 wt |
Oil |
Mugen 600 wt |
Spring |
Dark blue |
Spring |
Light blue |
Shock position |
Centre hole |
Shock position |
Third hole from top |
|
|
|
|
Steering Ackerman |
Set at C |
|
|
Front diff |
Mugen 100,000 wt |
Rear diff |
Mugen 30,000 wt |
|
|
|
|
Clutch |
|
Drive ratio |
|
Shoe |
Black |
Gear ratio |
Side pulley |
Spring |
Extra hard |
1 st 17 / 59 |
24 tooth |
Clutch bell clearance |
6.00 mm |
2 nd 23 / 53 |
|
Spring adj. nut position |
1.00mm |
|
|
|
|
|
|
Tires |
Front |
Rear |
|
Type |
Ellegi |
Ellegi |
|
Diameter |
31mm |
34mm |
|
Shore |
40 |
40 |
|
|
